march 2006 1 for more information visit: www.eatonelectrical.com pg.05e.18.t.e photoelectric sensors sm series pg.05e.18.t.e sm series photoelectric sensors contents overview . . . . . . . . . . . . . . . . . . . . . . 1 model selection, sensors . . . . . . . . . 3 model selection, compatible connector cables . . . . . . . . . . . . . . 4 model selection, accessories . . . . . . 4 wiring diagrams . . . . . . . . . . . . . . . . 4 speci?ations. . . . . . . . . . . . . . . . . . . 5 dimensions . . . . . . . . . . . . . . . . . . . . 5 the cutler-hammer sm series from eaton s electrical business provides high performance and ease of use in an economical, compact package. lock in on great performance with t argetlock a sensor can have the greatest performance in the world, but if it is slightly misaligned or the target is positioned at the wrong range, you will have reliability problems sooner or later. targetlock not only si mp li?s sensor setup but visually con ?ms your sensor is positioned to operate with the highest possible reliability. in addition, targetlock provides diagnostic information during use to inform you of impending problems before they result in equipment downtime. no sensor is easier to use the sm series includes many other features that simplify use. visible sensing beams on all models show you exactly where the sensors are pointing. the durable housing features multiple mounting options to easily ? on your equipment in the tightest of spaces. full protection from overvoltage, reverse polarity and short circuits reduces the chance of damage. bright 360?led indicators clearly show sensor status. approvals ul listed c-ul listed unless otherwise noted, the products contained in this document are not designed or intended for use in human safety applications. sm series with targetlock the easiest photoelectric sensor to set up and use product features highly visible led indicators for power, output and targetlock t argetlock simpli?s setup and ensures the sensor operates at the high- est level of reliability possible perfect prox models sense different colored targets at the same range and ignore objects in the background ac/dc models operate on either 18 ?264v ac or 18 ?50v dc dc-only models feature both npn and pnp outputs vi sible beam on all models let you see exactly where the sensor is pointing compact size to ? in tight spaces multiple mounting options including industry standard 18 mm threads reverse polarity, overload and short circuit protection full family includes thru-beam, polarized re?x, diffuse re?ctive and perfect prox background rejection t ypical applications packaging machines conveyors and other material handling equipment food processing equipment assembly machines pharmaceutical machines compact size #6 mounting holes t argetlock led (orange) power led (green) output led (red) micro-connector models 2-meter cable 18 mm threaded barrel ac/dc operation gain adjustment v isible red beam on all models for customer service in the u.s. call 1-800-356-1243 , in canada call 1-800-268-3578 . for application assistance in the u.s. and canada call 1-800-426-9184 .
march 2006 pg.05e.18.t.e for more information visit: www.eatonelectrical.com 2 photoelectric sensors sm series unparalleled optical performance ? perfect prox exceptional background rejection sets perfect prox apart from all other sensors. just point the sensor s visible beam at the target and get reliable detection regardless of color, re?ctance, contrast or surface shape, while ignoring background objects just a fraction of an inch away. fast and easy setup the sm series features an advanced 3-led indicator display to provide valuable information at a glance. the bright display is clearly visible from 360? in addition to leds for power and output status indication, the sm features a third led that is part of the targetlock system. t argetlock is a microprocessor- controlled system that enables you to quickly and easily align the sensor and ensure it is operating most reliably. alignment: the targetlock led provides a quick and easy way to set up the sensor for optimum operation. on initial setup, when you have achieved the minimum signal required for the sensor to operate, the targetlock led will blink in a short ?sh pattern. as you improve the setup and approach the best alignment and range, the led changes from short ?sh to long ?sh to a solid on condition. this means that even after you reach a point where the sensor will operate in the application, you are able to further ?e tune the setup for highest reliability. maintenance: another valuable feature of the targetlock led is to indicate the need for mainte- nance prior to loss of sensor oper- ation. observing a change from the normal operation of the led (for example, from solid on to a long ?sh) indicates the gain has been reduced. possible causes include bumping or vibrating out of alignment or contamination buildup on the lens. with the tar- getlock led, you are made aware of this condition before the sensor stops working, allowing you ample time to address the problem before your machine goes down. the following chart details the func- tion of each of the sm series led indicators. a target that doesn t fully block the effective sensing beam or is translucent may cause a ?shing indication and unreliable performance. gain adjustment thru-beam and diffuse re?ctive sensors include an adjustment con- trol for optimizing the amount of gain for the application. the 3/4-turn pot provides a 10:1 adjustment of gain. a mechanical stop eliminates the possibility of sensor damage. adjustment of the control does not require any special tools. mounting the sm sensor features two mount- ing holes in the rectangular section of the body for mounting to a sur- face with #6 or smaller hardware. the threaded barrel and jam nut allows mounting into any 0.75 inch (19 mm) hole or a selection of accessory mounting brackets available from eaton and detailed in pg.05.03.t.e . led state led condition (thru-beam/ re?x) (diffuse/ perfect prox ) power (green) on power is applied to sensor off no power output (red) on output is on off output is off flashing output is short circuited or overloaded tar get- lock (orange) on excellent alignment; sensor is operating within optimum range ta rget present ?excellent gain; sensor is operating within optimum range long flash good alignment ta rget present ?good gain short flash poor alignment ta rget present ?poor gain off target is present; if no target present: sensor is out of alignment or beyond range no target, or sensor is beyond range mounting sensor using a jam nut. mounting sensor using #6 hardware. mounted sm sensor in 18 mm ball swivel bracket, as seen in pg.05.03.t.e.
3 for more information visit: www.eatonelectrical.com pg.05e.18.t.e photoelectric sensors march 2006 sm series model selection nominal range ?sensor will detect a 90% re?ctance white card at this range. sensor will ignore a 90% re?ctance white card at this range. fast turn product with typical one day lead-time to shipment. see listing of compatible connector cables on page 4 . operating volt age sensing range optimum range cutoff range field of view thru-beam component connection t ype catalog number light operate dark operate 3-wire and 4-wire sensors thru-beam 10 ?30v dc 50 feet (15m) 0.1 to 25 feet (30 mm to 7.5m) 10 inch (254 mm) diameter at 10 feet (3m) source 2-meter cable e65-smts15-ha 4-pin micro dc connector e65-smts15-had detector 2-meter cable e65-smtd15-hl e65-smtd15-hd 4-pin micro dc connector e65-smtd15-hld e65-smtd15-hdd polarized re ex 18 ?264v ac 50/60 hz or 18 ?50v dc 10 feet (3m) 0.1 to 5 feet (30 mm to 1.5m) ? inch (25 mm) diameter at 50 inches (1.3m) ?-m eter cable e65-smpr3-gl e65-smpr3-gd 4-pin micro ac connector e65-smpr3-gld e65-smpr3-gdd 10 ?30v dc 10 feet (3m) 0.1 to 5 feet (30 mm to 1.5m) ? inch (25 mm) diameter at 50 inches (1.3m) ?-m eter cable e65-smpr3-hl e65-smpr3-hd 4-pin micro dc connector e65-smpr3-hld e65-smpr3-hdd diffuse re ective 18 ?264v ac 50/60 hz or 18 ?50v dc 8 inches (200 mm) 0.25 to 5 inches (6 mm to 127 mm) ? inch (50 mm) diameter at 5 inches (127 mm) ?-m eter cable e65-smsd200-gl e65-smsd200-gd 4-pin micro ac connector e65-smsd200-gld e65-smsd200-gdd 10 ?30v dc 8 inches (200 mm) 0.25 to 5 inches (6 mm to 127 mm) ? inch (50 mm) diameter at 5 inches (127 mm) ?-m eter cable e65-smsd200-hl e65-smsd200-hd 4-pin micro dc connector e65-smsd200-hld e65-smsd200-hdd perfect prox 18 ?264v ac 50/60 hz or 18 ?50v dc 2 inches (50 mm) 0.4 to 1.8 inches (10 mm to 45 mm) 2.3 inches (58 mm) and beyond 0.25 inch (6 mm) diameter at 2.25 inches (57 mm) ?-m eter cable e65-smpp050-gl e65-smpp050-gd 4-pin micro ac connector e65-smpp050-gld e65-smpp050-gdd 4 inches (100 mm) 0.5 to 3 inches (13 mm to 76 mm) 5 inches (127 mm) and beyond 0.35 inch (9 mm) diameter at 5 inches (127 mm) ?-m eter cable e65-smpp100-gl e65-smpp100-gd 4-pin micro ac connector e65-smpp100-gld e65-smpp100-gdd 10 ?30v dc 2 inches (50 mm) 0.4 to 1.8 inches (10 mm to 45 mm) 2.3 inches (58 mm) and beyond 0.25 inch (6 mm) diameter at 2.25 inches (57 mm) ?-m eter cable e65-smpp050-hl e65-smpp050-hd 4-pin micro dc connector e65-smpp050-hld E65-SMPP050-HDD 4 inches (100 mm) 0.5 to 3 inches (13 mm to 76 mm) 5 inches (127 mm) and beyond 0.35 inch (9 mm) diameter at 5 inches (127 mm) ?-m eter cable e65-smpp100-hl e65-smpp100-hd 4-pin micro dc connector e65-smpp100-hld e65-smpp100-hdd source detector for a complete system, order one source and one detector for complete system, order sensor and retrore- ?ctor (see pg.05e.17.t.e ) retrore?ctor (not included) sensor
march 2006 pg.05e.18.t.e for more information visit: www.eatonelectrical.com 4 photoelectric sensors sm series model selection ?compatible connector cables for a full selection of connector cables, see pg.05.05.t.e . fast turn product with typical one day lead-time to shipment. excess gain model selection ?accessories wiring diagrams (pin numbers are for reference only, rely on pin location when wiring ) vo ltage style number of pins gauge length catalog number pin con guration/wire colors (face view female shown) pvc jacket pur jacket irr pur jacket standard cables ?micro style ac 4-pin 4-wire 22 awg 6.0 feet (2m) csas4f4cy2202 csas4f4ry2202 csas4f4io2202 dc 4-pin 4-wire 22 awg 6.0 feet (2m) csds4a4cy2202 csds4a4ry2202 csds4a4io2202 description reference retrore?ctors and retrore ective tape see pg.05e.17.t.e mounting brackets see pg.05.03.t.e replacement mounting nuts and other accessories see pg.05.04.t.e connector cables see pg.05.05.t.e operating volt age mode cable models micro-connector models (face view male shown) 3-wire sensors 18 ?264v ac, 50/60 hz or 18 ?50v dc all sensors 4-wire sensors 10 ?30v dc thru-beam source all others micro style straight female 2-red/white 3-red 4-green 1-red/black 1- b r o wn 2- white 3 - blue 4- blac k 1000 10 1 1 0.1 10 100 range (feet) excess gain 100 range (m) 0.3 0.03 3.0 30.5 1 2 1000 10 1 1 0.1 10 range (inches) excess gain 100 range (mm) 25 2.5 254 2 1 1000 10 1 1 0.1 10 range (inches) excess gain 100 range (mm) 25 2.5 254 1. thru-beam 2. polarized re?x (based on a 3-inch diameter retrore?ctor) 1. 50 mm perfect prox 2. 100 mm perfect prox diffuse re?ctive (based on a 90% re?ctance white card) bu wh bk bn l1 or (-) l2 or +v no connection load l2 or +v l1 or (-) load no connection bu bn (-) +v (-) +v bu wh (-) bk load bn +v load (-) +v load load
5 for more information visit: www.eatonelectrical.com pg.05e.18.t.e photoelectric sensors march 2006 sm series speci?ations note: our products conform to nema tests as indicated, however, some severe washdown applications can exceed these nema test sp eci?ations. if you have questions about a speci? application, contact our applications department. approximate dimensions in inches (mm) ac/dc models dc models ac operation dc operation input voltage 18 ?264v ac, 50/60 hz 18 ?50v dc 10 ?30v dc power dissipation 4 va maximum 4 va maximum 2w maximum output type vmos (bi-directional) npn (sink) npn and pnp (dual outputs) current switching 200 ma maximum 200 ma maximum 100 ma maximum vo ltage switching 264v ac 50v dc 30v dc maximum off-state leakage 500 ? maximum 500 ? maximum 10 ? maximum surge current 2a maximum 2a maximum 1a maximum on-state voltage drop 3.5v maximum 3.5v maximum 2.5v maximum response time 16 ms 1 ms 1 ms protection short circuit and overload protection (output indicator led will ash). reverse polarity protection (sensor will reset automatically once fault is removed). important: during installation, correct power connections must be made rst to ensure fail-safe short circuit protection of the outputs light/dark operation by model te mperature range operating: -13?to 131? (-25?to 55?); storage: -13?to 158? (-25?to 70?) material of construction lens: polycarbonate; cable jacket: pvc; body: cycoloy cable/connector cable models: 6.5 foot (2m) 4-wire cable; connector models: 4-pin, micro-connector (ac-key on ac/dc models; dc-key on dc models) vi bration and shock vibration: 30g over 10 hz to 2 khz; shock: 50g for 10 ms 1/2 sinewave pulse indicator leds green led: power; red led: output; orange led: targetlock source light visible red, 660 nm gain adjustment 3/4-turn pot, 10:1 adjustment of gain (provided on thru-beam and diffuse re ective sensors only) sunlight immunity perfect prox? 5,000 foot-candles; all others: 10,000 foot-candles enclosure ratings nema 1, 3, 4, 4x, 6, 6p, 12 and 13; ip68 1.70 (43) 0.83 (21) 0.75 (19) ? 0.16 (4) 2 places 1.51 (38) 1.02 (26) m18 x 1.0 connector model s 0.41 (10) cable model s 0.35 (9) 1.47 (37) 1.05 (27) 0.58 (15) 0.10 (2.5) 1.63 (41) ac/dc models only 1.29 (33)
|
